Evaluation of RADARSAT-2 Acquisition Modes for Wetland Monitoring Applications
Cited 0 time in
- Evaluation of RADARSAT-2 Acquisition Modes for Wetland Monitoring Applications
- Brian, Brisco
- Remote Sensing
- Issue Date
- Brisco, Brian., et al. 2015. Evaluation of RADARSAT-2 Acquisition Modes for Wetland Monitoring Applications. Canadian Journal of Remote Sensing, 41(5): 431-439.
- InSAR techniques can monitor water level changes in wetlands with suitable coherence. RADARSAT-2 has many beam modes with varying system parameters to satisfy a wide range of applications. During data acquisition the SAR signals are digitized using 8-bit Analog to Digital (A/D) converters followed by Block Adaptive Quantization (BAQ) coding. Most RADARSAT-2 beam modes use 3-bit BAQ but some modes use 2-bit BAQ to accommodate larger data sets, including the wide multi-look fine and wide ultra-fine modes. These modes are attractive for surface monitoring applications due to good resolution over a wide swath. The 2-bit BAQ can have signal saturation due to the smaller dynamic range and an increased phase noise. The Everglades National Park (ENP) has been used for numerous
InSAR investigations of water level monitoring. This study describes the results of an evaluation of RADARSAT-2 products from different modes for the monitoring of water level changes and flooded vegetation in ENP. The objective was to evaluate products from a variety of beam modes for wetland monitoring applications and subsequent unwrapping of the interferograms for water level estimation. The results show wide swath high resolution modes are suitable for InSAR applications due to adequate coherence and high backscatter intensity.
- Files in This Item
- Can archive pre-print and post-print or publisher's version/PDF
Can archive post-print (ie final draft post-refereeing) or publisher's version/PDF
Can archive pre-print (ie pre-refereeing)
Archiving not formally supported
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.